Wagner 0538204A Vector Grip Needle Packing Seal Assembly

Airless spray guns will require periodic service, over time and after many trigger pulls the carbide ball at the end of the needle will wear against seat on the diffuser. This will cause paint to leak or spit from the tip when you let go of the trigger. 

Replacing the needle and diffuser (gun kit) is a normal part of airless sprayer maintenance and should be done as required. Keep a spare kit in your tool box to reduce down time on the job. 

Suitable for the following model guns – 

Wagner Vector Grip 0538048

Titan RX-Pro 4 Finger Trigger 0538020

Parts listing for Vector Grip -

• Item 1 - XXXXXX Not available
• Item 2 - 0538306 Trigger Screw Long
• Item 3 - 0538305 Retractor Pin
• Item 4 - 0538224 Trigger Two Finger
• Item 5 - XXXXXX Not available
• Item 6 - 594-033 Carbide Seat
• Item 7 - 594-006 Diffuser O Ring
• Item 8 - 05382322 Diffuser, 7/8" Thread
• Item 9 - 0553XXX  Reversible Tip
• Item 10 - 0289390 Tip Guard, 7/8" Thread
• Item 11 - 0297007 Tip Saddle
• Item 12 - 0508423 Tip Seal
• Item 13 - 0538323 End Cap
• Item 14 - 0538324 Packing Spring
• Item 15 - 0538204A Packing Seal Assembly
• Item 16 - XXXXXX Not available
• Item 17 - 580-513 Trigger Screw Short
• Item 18 - 0538229 Handle Grip Medium
• Item 19 - 9805470 Handle Grip Screw
• Item 20 - 0538315 Handle
• Item 21 - 0538342 O Ring
• Item 22 - 0538337 Washer
• Item 23 - 0538205 Swivel
• Item 24 - 0034377 White Push In Filter
• Item 25 - 0296343 Spring
• Item 26 - 560-038 Handle Seal
• Item 27 - 0296344 Tube
• Item 28 - 0538320 Trigger Guard
• Item 29 - 0538222 Trigger Four Finger

Items recommended to buy with this part– 

Item 6 - 594-033 Vector Grip Carbide Seat 

Item 7 - 594-006 Vector Grip Carbide Seat Seal 

Wagner Part No. 0538204A

Titan Part No. 0538204

Click here to see the full range of Wagner Vector Grip Parts